HAUG AG 30 High Voltage Charging Generator

The AG 30 charging generator is a high-voltage unit that is used together with HAUG charging electrodes and a suitable counter-electrode. The charging electrode must be mounted at 10 to 30 mm above the material to be charged, exactly opposite the counter-electrode. When an earthed counter-electrode is used, it must be in contact with the material to be charged.

In order to obtain a constant and reliable charging, we strongly recommend that the materials, which are to be pinned together, be neutralized by means of an appropriate HAUG ionizing system before the charging process.

ag-30-lrg

HAUG-Charging Systems

HAUG charging systems are designed to apply electrostatic charges without physical contact. These systems can be used for any application where different materials are to be pinned together electrostatically. At least, one of these materials must be non-conductive. The electrostatic pinning serves to enhance subsequent processes, such as film/foil overlapping in packaging machines.

Special Features and Advantages

The AG 30 charging generator generates an adjustable high voltage of 40 kVDC. The device is available with either positive or negative polarity. Integrated measuring instruments show the voltage and the actual flowing current. High voltage and current threshold can be set with two different potentiometers. In the event that the flowing current exceeds the pre-set limit, an error signal is receivend and the high voltage is switched off.
The AG 30 charging generator can be set up for intermittent service by means of an external control.

An external signalling unit can be activated through the integrated signal connection.

Applications

HAUG charging systems can be used for:

  • the pinning and positioning of film/foil, paper, and cardboard on different materials such as sheet steel, glass panels, wood sheets, and similar;
  • the pinning of film/foil in packaging machines or in film/foil sealing machines;
  • the pinning of film/foil in reversing winding systems, the pinning of film/foil reels in order to prevent the telescope effect, and the pinning of film/foil onto the cardboard tube, without any adhesive, at the start of film winding.

Technical Data

Types AG 30 230 V positive Order-No.: 09.7700.200
115 V positive Order-No.: 09.7701.200
AG 30 230 V negative Order-No.: 09.7702.200
115 V negative Order-No.: 09.7703.200
with analog display
AG 30 230 V positive Order-No.: 09.7800.200
115 V positive Order-No.: 09.7801.200
AG 30 230 V negative Order-No.: 09.7802.200
115 V negative Order-No.: 09.7803.200
with analog/digital display
Dimensions 390 x 280 x 210 mm (L x B x H)
Protection Type IP 54
Protection class I
Supply voltage 115 VAC / 230 VAC (50 – 60 Hz)
Power consumption approx. 60 VA
Output-voltage
charging
approx. 40 kVDC
Output short-circuit current
charging
(lk) ≤ 4,5 mA
Pulse frequency 1 Hz, via floating normally open contact
HV-terminals charging 2
Operating temperature +5 °C to +45 °C
Storage/transport temperature -15 °C to +60 °C
Weight 13 kg
Mains cable 2,6 m; fixed to the device

Subject to technical changes!

Accessories

Round plug Order-No.: X-0616
Angled plug Order-No.: X-5718
Signaling cable K1,
shielded, incl. round plug
5 m Order-No.: 06.8941.000
10 m Order-No.: 06.8941.001
20 m Order-No.: 06.8941.002