HAUG AG 35 Charging Generator With Two High Voltage Connections

Beside its two high-voltage connections for the charging section, the charging generator AG 35 also offers a discharge section with four high-voltage connections and electronic fault and performance monitor. The electronic voltage adjustment is stepless, and there is an analog voltage output display integrated into the unit.

ag-35-lrg

HAUG Charging Systems

HAUG charging systems are designed to apply electrostatic charges without physical contact. These systems can be used for any application where different materials are to be pinned together electrostatically. At least, one of these materials must be non-conductive. The electrostatic pinning serves to enhance subsequent processes, such as film/foil overlapping in packaging machines.

All HAUG charging generators are available with positive or negative polarity.

Applications

HAUG charging systems can be used, among others, in the following applications:

  • for fixing and positioning films and foils, paper and cardboard, e.g. on steel sheets, glass panels, wood panels or similar;
  • for fixing films and foils on packaging machines / film welding machines;
  • for fixing films and foils on turrent film winders, for fixing the wound film against telescoping and glue-less commencement of the film winding process on cardboard tubes.

Technical Data AG 35

Dimensions 390 x 280 x 210 mm (L x B x H)
Protection Type IP 54
Protection class I
Supply voltage 115 VAC / 230 VAC (50 – 60 Hz)
Power consumption approx. 100 VA
Output-voltage
charging
approx. 40 kVDC
Output-voltage
discharging
approx. 7-8 kVAC
Output short-circuit current
charging
(lk) ≤ 0,8 mA
Output short-circuit current
discharging
(lk) ≤ 5 mA
HV-terminals charging 2
HV-terminals discharging 4
Connectable length (discharging) max. 18 m (ionizing unit incl. HV-cable)
Operating temperature +5 °C to +45 °C
Storage/transport temperature -15 °C to +60 °C
Weight 14 kg
Mains cable 2,6 m; fixed to the device

Subject to technical changes!

Accessories AG 35

Round plug Order-No.: X-0616
Angled plug Order-No.: X-5718
Signaling cable K1,
shielded, incl. round plug
5 m Order-No.: 06.8941.000
10 m Order-No.: 06.8941.001
20 m Order-No.: 06.8941.002