HAUG High Voltage Power Pack Multitstat Plus

The high-voltage power pack Multitstat Plus with its long permissible connected length and extended monitoring facilities is a high-performance unit. The Multistat Plus is particularly suited to systems with multiple ionizing bars. The extended functions of the Multistat Plus allow improved monitoring of the ionizing system set-up with this unit.

The unit has 6 individually monitored high-voltage sockets. Any overload is indicated by means of a warning lamp and a signal at the signalling socket.

All HAUG ionizing units can be connected using the X-2000 high-voltage connector system. The most appropriate HAUG ionizing units can therefore be used depending on the fitting dimensions, the required output and the application conditions.

multistat-plus-lrg

Display

The display indicates the high-voltage or currents at the 6 high-voltage connections. The currents are output one after another in a fixed sequence. This allows good monitoring of the ionizing units connected to the HV sockets.

Technical Data

Types Multistat Plus 115V Order-No.: 01.7863.100
230V Order-No.: 01.7862.100
Protection type IP 54
Protection class I
Supply voltage 115 VAC / 230 VAC (50 – 60 Hz)
Power consumption approx. 200 VA
Output-voltage approx. 6 – 8 kVAC
Output short-circuit current per HV-Socket (lk) ≤ 4 mA (permissible operating range)
Load rating of signalling contacts: 24 VAC / 35 VDC max. 50mA
HV-terminals 6
Connectable length max. 6 x 10m (ionizing unit incl. HV-cable)
Operating temperature +5 °C to +45 °C
Storage/transport temperature -15 °C to +60 °C
Weight approx. 11 kg
Mains cable 2.6 m; fixed to the device

Subject to technical changes!

Accessories

Signalling cable K1
shielded, incl. round plug
5 m Order-No.: 06.8941.000
10 m Order-No.: 06.8941.001
20 m Order-No.: 06.8941.002
Round plug Order-No.: X-0616
Angled plug Order-No.: X-5718