Static Eliminators – Ionizing Bar – HAUG EI VS

The HAUG EI VS ionizing bar reliably removes electrostatic charges and its performance, when compared to the standard version, is considerably enhanced.

The EI VS ionizing bar has all of the typical features that characterize HAUG ionizing bars: the reliably and removable plug-and-socket connection System X-2000, the shielded high-voltage cable, the special stainless-steel electrodes and the convenience of being safe to touch.

The electrical capacity of the EI VS ionizing bar is three times as great as the standard version, and therefore, it is necessary to base any power pack load calculations on a bar length three times as long.

Example:
EI VS 50 cm with 200 cm cable
Power pack load: 3 x 50 cm + 200 cm = 350 cm

ei-rn

Other Bar Types Are Available

  • EI VSE as EI VS, with HV-cable connection on bar for series connection of ionizing units.
  • EI VSA without HV-cable, suitable for connecting a highly flexible detachable HV-connection cable.
  • EI VSAE, as EI VSA with HV-cable connection on bar for series connection of ionizing units.

Applications

  • Plastic processing industry: Film processing, packaging machines, film extruders, etc.
  • Textile industry: Weaving and spinning mills, textile finishing plants, etc.
  • Graphic industry: Screen and pad printing machines, photographic and film processing machines, folding machines, etc.
  • Paint shops: Car painting, painting of plastic components, etc.

Technical Data

Type EI VS inseparable HV-cable
attached permanently to bar
Order-No.: 03.8020.000
HV-cable Order-No.: 06.0210.000
EI VSE as EI VS, with HV-
connection on end of bar for series connection of ionizing units
Order-No.: 03.8022.000
EI VSA for connection of a
highly flexible, detachable HV-cable
Order-No.: 03.8021.000
VK-Norm 21 Order-No.: 05.8517.000
VK-Norm 22 Order-No.: 02.8522.000
VK-Norm 23 Order-No.: 05.8519.000
VK-Norm 24 Order-No.: 05.8518.000
EI VSAE as EI VSA, with HV-
connection on end of bar for series connection of ionizing units
Order-No.: 03.8023.000
Diameter 18 mm /20 mm
Length 150 mm to 2.500 mm
Operating temperature +5°C to +45°C
Storage/transport temperature -15°C to +60°C
Optimum effective distance 20 – 30 mm
Effective length Bar length – 120 mm
Smallest bending radius (cable) R 50

Subject to technical changes!

Technical illustration:

g156

g157

Accessories

5stabhalter Bar holder ”Klick Zack” Order-No.: 10.0004.000
Bar holder, bloc, half open Order-No.: 10.0301.000
Bar holder Order-No.: 10.0227.000
Clamping holder, 2 parts Order-No.: 10.0268.000
Angle, large Order-No.: X-0404

Suitable Power Packs

Connectable lengths
(ionizing unit incl.
high-voltage cable)
EN SL max. 5 m
EN SL LC / EN SL RLC max. 10 m
EN 8 / EN 8 LC max. 18 m
Multistat max. 18 m
EN 70 / EN 70 LC max. 2 x 18 m

Please pay attention to the multiplier!