CARBICOTE COATINGS

PEEL PPT1 PS
powder-in-bowls
silver-cans

The accumulation of paint overspray inside a spray-booth is UNSAFE and UNPRODUCTIVE.

UNSAFE

Paint overspray and residue may be toxic to workers and cause serious fire and explosion risks.

UNPRODUCTIVE

The build up of paint overspray lowers productivity by:
1.reducing visibility
2.creating uneven and sticky walking surfaces
3.causing product defects from dirty surroundings

Carbicote How-To Videos

Play Video
Play Video
Play Video

Open Face Booth: Diagram A
Three walls, ceiling, and floor option is shown in Diagram A.

Cross Draft Booth: Diagram B
Four walls, ceiling, and floor option is shown in Diagram B.

Coating Selector

SURFACES
PRODUCTS
920
wb
942
wb
945
wb
946
sb
947
sb
948
sb
949
wb
951
wb
WALLS
Clean galvanized and mild steel.
★★★
★★★
★★★
★★
New powder coated steel.
★★★
Previous coating is removed but surface is scratched,
pitted and contains some rust.
★★★
★★★
★★
Previous coating is not fully removed or light overspray remains.
★★★
★★
★★★
FLOORS
Hardened concrete.
★★★
★★★
Concrete. coated and sealed with well cured 2K solvent based epoxy.
★★★
Hardened concrete previously coated but rough and pitted.
★★★
★★★
LIGHTS
★★★
PRODUCT RATING CRITEREA
RECOMMENDATION LEVEL KEY
  • Total ft2 of coverage @ 5 mil dry film thickness (walls).
  • Strippability
  • Heat cycling
  • Total cost
  • BEST ★★★
  • BETTER ★★
  • GOOD ★